References

• Ashby, M. (2012). Engineering materials and their properties. [cite_start]In Engineering Materials 1. https://doi.org/10.1016/B978-0-08-096665-6.00001-5 [cite: 60]
• Bean, T., Wilson-Lopez, A., & Gregory, K. (2023). Shifting from disciplinary versus content area literacy to a transdisciplinary approach. [cite_start]In International Encyclopedia of Education. https://doi.org/10.1016/B978-0-12-818630-5.07002-0 [cite: 63]
• Benjamin, A., Dezfuli, H., & Everett, C. (2016). Developing probabilistic safety performance margins for unknown and underappreciated risks. [cite_start]Reliability Engineering & System Safety, 145. https://doi.org/10.1016/j.ress.2015.07.021 [cite: 58]
• Boin, A., van Duin, M., & Heyse, L. (2001). Toxic fear: the management of uncertainty in the wake of the Amsterdam air crash. [cite_start]Journal of Hazardous Materials, 88. https://doi.org/10.1016/S0304-3894(01)00268-0 [cite: 57]
• Bullock, J. (2021). Mitigation, prevention, and preparedness. [cite_start]In Introduction to Homeland Security. https://doi.org/10.1016/B978-0-12-817137-0.00010-9 [cite: 52]
• Chang, H., & Chen, J. (2004). The conflict-problem-solving CAD software integrating TRIZ into eco-innovation. [cite_start]Advances in Engineering Software, 35. https://doi.org/10.1016/j.advengsoft.2004.06.003 [cite: 61]
• Darbellay, F. (2020). Serendipity. [cite_start]In Encyclopedia of Creativity. https://doi.org/10.1016/B978-0-12-809324-5.23791-7 [cite: 26, 27]
• Duffey, R. (2005). Predicting tragedies, accidents, errors and failures using a learning environment. [cite_start]Science and Technology of Advanced Materials, 6. https://doi.org/10.1016/j.stam.2005.07.003 [cite: 51]
• Fowler, K. (2015). Dealing with risk. [cite_start]In Developing and Managing Embedded Systems and Products. https://doi.org/10.1016/B978-0-12-405879-8.00004-0 [cite: 64]
• Jacky, J. (1996). Safety-critical computing: Hazards, practices, standards, and regulation. [cite_start]In Computerization and Controversy. https://doi.org/10.1016/B978-0-12-415040-9.50146-9 [cite: 54]
• Jones, D. (2019a). Engineering materials and their properties. [cite_start]In Engineering Materials 1. https://doi.org/10.1016/B978-0-08-102051-7.00001-4 [cite: 59]
• Jones, D. (2019b). Fast fracture and toughness. [cite_start]In Engineering Materials 1. https://doi.org/10.1016/B978-0-08-102051-7.00013-0 [cite: 53]
• Koren, I., & Krishna, C. (2007). Preliminaries. [cite_start]In Fault-Tolerant Systems. https://doi.org/10.1016/B978-012088525-1/50004-3 [cite: 17, 18]
• Manion, M., & Evan, W. (2002). Technological catastrophes: their causes and prevention. [cite_start]Technology in Society, 24. https://doi.org/10.1016/S0160-791X(02)00005-2 [cite: 50]
• Moran, S. (2019). Success through failure (or “you don’t want to do it like that!”). [cite_start]In An Applied Guide to Process and Plant Design. https://doi.org/10.1016/B978-0-12-814860-0.00018-5 [cite: 55]
• Rosenberg, J. (2017). Embedded security. [cite_start]In Rugged Embedded Systems. https://doi.org/10.1016/B978-0-12-802459-1.00011-7 [cite: 2, 24]
• Schuelke-Leech, B. (2018). A model for understanding the orders of magnitude of disruptive technologies. [cite_start]Technological Forecasting and Social Change, 129. https://doi.org/10.1016/j.techfore.2017.09.033 [cite: 62]